CT-10 radial patch 1-3/4″ X 3″ (45X75MM) For use in the crown and shoulder nail hole repairs as part of two piece repair with Uni-Seal Ultra Stems. Comes 20 per box.
$26.95
CT-10 radial patch 1-3/4″ X 3″ (45X75MM) For use in the crown and shoulder nail hole repairs as part of two piece repair with Uni-Seal Ultra Stems. Comes 20 per box.
CT-20 radial patch 2-3/8″ X 4-3/8″ (60X110MM) For use in the crown and shoulder nail hole repairs as part of two piece repair with Uni-Seal Ultra Stems. Comes 10 per box.
The 251UL, UL8 Uni-Seal Ultra repair is for prepared injury sizes 5/16″ (8mm), with 14 repair units per box.
TECH Uni-Seal Ultra one-piece repair units provide a simple, quick, and safe method to properly repair radial and bias tires with injury angles less than 25 degrees. TECH Uni-Seal Ultras have passed the most stringent tire test standards in the world, including the US FMVSS139 New Tire Endurance Test. These repairs meet or exceed international tire industry guidelines for proper puncture repair, such as the ECE 108 & 109 Regulations. Tires repaired with Uni-Seal Ultras are permanently filled by the stem and strengthened by the thick, non-fabric-reinforced rubber cap. The stem and cap of the repair are sealed and vulcanized to the tire with TECH ‘s thick chemical cushion gum.
Permacure is a nylon reinforced rubber insert wrapped with Tech’s gray chemical cushion gum. The 222 is designed to repair injuries in bias and radial passenger and light truck tires. Each plug insert is 3.75″ (95MM) in length. Tire Industry recommendations state that the tire should be demounted and repaired from the inside, using suitable rubber vulcanizing material and appropriate repair unit on the inner liner. Comes 50 count per box.
Square All Purpose repair designed for use in radial or bias tires. 2 1/4″ (55mm) diameter. Use with appropriate injury filler material for a permanent industry recommended repair. Can also be used to repair tubes. The #116 includes 65 patches per tub.