UNI-SEAL PATCH-PLUG REPAIRS
TECH Uni-Seal Ultra one-piece repair units provide a simple, quick, and safe method to properly repair radial and bias tires with injury angles less than 25 degrees. TECH Uni-Seal Ultras have passed the most stringent tire test standards in the world, including the US FMVSS139 New Tire Endurance Test. These repairs meet or exceed international tire industry guidelines for proper puncture repair, such as the ECE 108 & 109 Regulations. Tires repaired with Uni-Seal Ultras are permanently filled by the stem and strengthened by the thick, non-fabric-reinforced rubber cap. The stem and cap of the repair are sealed and vulcanized to the tire with TECH ‘s thick chemical cushion gum. The 290UL (UL10N) is an excellent repair for self-sealing truck tires produced with sealant beneath the inner liner.
-
#291UL 3/8″ Uni-Seal Ultra Max
The 291UL repairs up to 3/8″, 10mm injuries in the crown area of both radial and bias light truck, truck, agricultural and OTR tires. The 291UL cap has cross weave technology which allows the repair to flex, resist heat and reinforce the inner liner of the tire. The 291UL comes with a lead wire attached thus ensuring a simple and fast insertion of these repair units into the tire injury. TECH’s gray cushion gum is applied to both the stem and the cap of the 291UL, thus assuring superior vulcanization and a permanent repair.
Sold in 10 piece box.
$99.50 -
#290UL 3/8″ Uni-Seal Ultra Repair
The 290UL, UL10 Uni-Seal Repair is for a prepared injury size of 3/8″ (10mm), 10 repairs per box.
TECH Uni-Seal Ultra one-piece repair units provide a simple, quick, and safe method to properly repair radial and bias tires with injury angles less than 25 degrees. These repairs meet or exceed international tire industry guidelines for proper puncture repair. Tires repaired with Uni-Seal Ultras are permanently filled by the stem and strengthened by the thick, non-fabric-reinforced rubber cap. The stem and cap of the repair are sealed and vulcanized to the tire with TECH’s thick chemical cushion gum.
$72.95 -
#251-1UL 5/16″ Uni-Seal Ultra Stem
The 251-1UL Uni-Seal Ultra Stem is for 5/16″ (8mm) prepared injury sizes, as part of a two piece repair. The 251-1UL are packed 20 stems per box.
TECH Uni-Seal Ultra Stems feature a lead wire for quick easy installation in prepared tire injuries. Each stem is wrapped with TECH’s thick chemical cushion gum which permanently fills, seals, and vulcanizes to the tire. These stems must be used in conjunction with the appropriate repair unit on the inside of the tire.
$44.90 -
#251UL 5/16″ Uni-Seal Ultra
The 251UL, UL8 Uni-Seal Ultra repair is for prepared injury sizes 5/16″ (8mm), with 14 repair units per box.
TECH Uni-Seal Ultra one-piece repair units provide a simple, quick, and safe method to properly repair radial and bias tires with injury angles less than 25 degrees. TECH Uni-Seal Ultras have passed the most stringent tire test standards in the world, including the US FMVSS139 New Tire Endurance Test. These repairs meet or exceed international tire industry guidelines for proper puncture repair, such as the ECE 108 & 109 Regulations. Tires repaired with Uni-Seal Ultras are permanently filled by the stem and strengthened by the thick, non-fabric-reinforced rubber cap. The stem and cap of the repair are sealed and vulcanized to the tire with TECH ‘s thick chemical cushion gum.
$40.95 -
#250UL 1/4″ Uni-Seal Ultra Repair
The 250UL, UL6 Uni-Seal Repair is for a prepared injury size of 1/4″ (6mm) with 14 repair units per box.
TECH Uni-Seal Ultra one-piece repair units provide a simple, quick, and safe method to properly repair radial and bias tires with injury angles less than 25 degrees. These repairs meet or exceed international tire industry guidelines for proper puncture repair. Tires repaired with Uni-Seal Ultras are permanently filled by the stem and strengthened by the thick, non-fabric-reinforced rubber cap. The stem and cap of the repair are sealed and vulcanized to the tire with TECH ‘s thick chemical cushion gum.
$36.95 -
#249UL 1/8″ Uni-Seal Ultra Repair
The 249UL, UL3 Uni-Seal Ultra repair is for prepared injury sizes 1/8″ (3mm), with 24 repair units per box.
TECH Uni-Seal Ultra one-piece repair units provide a simple, quick, and safe method to properly repair radial and bias tires with injury angles less than 25 degrees. TECH Uni-Seal Ultras have passed the most stringent tire test standards in the world, including the US FMVSS139 New Tire Endurance Test. These repairs meet or exceed international tire industry guidelines for proper puncture repair, such as the ECE 108 & 109 Regulations. Tires repaired with Uni-Seal Ultras are permanently filled by the stem and strengthened by the thick, non-fabric-reinforced rubber cap. The stem and cap of the repair are sealed and vulcanized to the tire with TECH ‘s thick chemical cushion gum.
$34.95 -
#250-1UL 1/4″ Uni-Seal Ultra Stem
The 250-1UL Uni-Seal Ultra Stem is for 1/4″ (6mm) prepared injury sizes, as part of a two piece repair. The 250-1UL are packed 20 stems per box.
TECH Uni-Seal Ultra Stems feature a lead wire for quick easy installation in prepared tire injuries. Each stem is wrapped with TECH’s thick chemical cushion gum which permanently fills, seals, and vulcanizes to the tire. These stems must be used in conjunction with the appropriate repair unit on the inside of the tire.
$32.95 -
#915 Spiral Cement Tool
Our spiral cement tool is used to help coat the inside of tire punctures with our vulcanizing fluid.
$10.90
