- Black, diamond-shaped, fabric-reinforced repairs with an extremely tough cover stock and beveled edges
- Designed to be used on top side of belt
- Recommended for permanent repair of impact breaks
- Must be applied using Pangofol and PANG Activator
- Available in four widths
- DP5 – 4-1/2″
- DP10 – 7-1/2″
- DP15 – 11″
- DP20 – 14-1/2″
Non-Reinforced Diamond Repairs
$95.86 – $149.58
Related products
-
RS3F Rapid Solution Heat Cure Cement
Rapid Solution is a black vulcanizing cement used with hot splicing materials in conventional vulcanizers. Recommended for hot splicing, repair or fabrication of rubber conveyor belts, or heat-curing pulley lagging.
- Formulated for curing temperatures from 210°F (100°C) to 320°F (160°C)
- For best results, use with PANG low temperature rubber compounds, cushion gums or PANG cover stock and tie gum
- Available in: Quart and Gallon
$25.95 – $73.33 -
#960 PANG Metal Primer
PANG Primer prevents oxidation of prepared metal surfaces for maximum adhesion with rubber or PVC cements. PANG Primer is recommended for use on metal or concrete surfaces before Plastopang or Pangofol is applied.
- Gray finish
- Can be used to coat chutes, hoppers, drums and tanks prior to applying PANG adhesives
- Fast-drying
- Can be applied with a brush, roller or sprayer
- Available in quarts or gallons
- Material Safety Data Sheet
$42.95 – $134.95 -
Reinforced Diamond Repairs
- Black, diamond-shaped, fabric-reinforced repairs with an extremely tough cover stock and beveled edges
- Designed to cover bottom side of belt for breakthrough damage
- Recommended for permanent repair of impact breaks
- Must be applied using Pangofol and PANG Activator
- Available in four different widths
- NDP5 – 5.25″ x 6″ bx of 10
- NDP10 – 8″ x 10″ bx of 5
- NDP15 -10.5″ x 14″ bx of 3
- NDP20 – 17.5″ x 18″ bx of 2
$159.93 – $232.66 -
PANG A & B Strip Rubber 5lb ea
Reduce repair time and labor cost by using our reliable PANG A & B Strip Rubber!
- Clean process, no hand mixing!
- No wait time for solvent evaporation
- Excellent for belt and lagging repair as well as filling rubber lining seams
- Cures to 50-60 durometer hardness
- 18 month shelf life
- 5 – 1lb rolls per box
- Approximately 8.3 sq. ft. coverage per A & B box mixture
For an individual box of A rubber or B rubber please send us an email at info@techtirerepairsnc.com
$350.00
