PROGRAMMABLE UNIVERSAL TPMS SENSOR(for NA market)
Autel 1-Sensor combines both 315MHz + 433MHz frequencies into one TPMS sensor with the highest industry vehicle coverage. The exclusive MX-Sensor patented PRESS release valve stem design, allows rubber and metal valve stems to freely interchange by hand, without requiring a tool for sensor head fitting. Built to match or exceed OEM sensors in frequency strength and durability, MX-Sensors are 100% ID clone-able with no relearn required and offer latest model vehicle coverage because they quickly update during installation with an Autel wireless programming tool.
-
Autel 1-Senor Dual Frequency TPMS Sensor
$25.95 -
Autel TS508 TPMS Tool Includes 8 FREE SENSORS
The TS508 is an easy-to-use hand-held TPMS service tool with complete TPMS capabilities including activation of All known sensors, programming mx-sensors to replace OE sensors, displays vehicle-specific relearn procedures and can connect to the vehicle to perform OBD II-relearn for the increasing number of vehicle’s requiring this type of relearn. The TS508 features a new streamlined user interface with quick start and advance mode.
$280.00 -
CP871 – High Speed Tire Buffer
Ideal for patchwork, roughing areas for recapping and cleaning tire moldings.
Features
- High speed tire buffer
- Adjustable speed control
- Jacobs quality 3/8″ (10 mm) chuck for holding buffing accessories
- Lock-off lever to prevent accidental start-up
- Rear exhaust
$109.95 -
U.W.T. Pliers Replacement Parts Kit
The U.W.T. Parts Replacement kit includes one each of the hook, boot and cap so that you never have to buy a new tool again!
$18.60 -
U.W.T. HD Wheel Weight Pliers
The UWT Wheel Weight Pliers are quite simply the best wheel weight tool on the market today. They are the only tool that can remove all weights, including “clip only” style, fast and easy, without pinching fingers or scratching rims. Replacement kits are also available, to make sure you NEVER have to buy another tool again! Check out the video below for a demonstration!
$85.00 -
KEN32120 24″ Tire Iron
This tool is designed for fast and efficient tire changing. Use the 24″ spoon to mount or demount passenger car, motorcycle, ATV, and light truck tires.
Length: 24″
Stock: 11/16″
$32.95 -
KEN32109 9″ Motorcycle Tire Iron
Extended length of the flat curved sliding surface provides mounting ability comparable to much longer traditional tire irons. Designed for mounting and demounting tires. Best if used in pairs.
Length: 9″
Stock: 7/16″
$23.95 -
KEN31568 Standard Wheel Cover Puller/Replacer
Removes wheel covers quickly and easily without gouging or scratching them. Rubber head T11RH prevents damage to hub cap and is replaceable.
$30.95 -
KEN29999 ValveCapper Pro
The ValveCapper Pro is 4 tools in 1; a valve cap remover and installer as well as a valve core remover and installer. The valve core end features a patent pending design that grips and holds the valve core to keep it in the tool safely until it is ready to be reinstalled. The ValveCapperPRO is 11.8 inches long and molded from glass-filled nylon. This length allows the tool to reach to the inside dual tire’s valve stem without discomfort or risk of burns from hot wheel components. Each end of the tool features a flexible thermoplastic rubber grip. One end is designed to fit over and remove the valve cap and the other end features a valve core remover that grips and holds the valve core. Because the valve core is held in place, the chances of dropping or losing the core are reduced dramatically.
$14.95 -
DP800 Large Drain Plug & Gasket Assortment Kit
The DP800 is a Drain Plug and Gasket Assortment Kit that contains over 150 pieces. Please see the description below for a full breakdown of parts.
$45.90 -
DP600 Drain Plug Assortment Kit
The DP600 Drain Plug Assortment kit contains over 100 pieces and is mainly used on newer cars. Please see the description below for a full breakdown of parts.
$65.50 -
Alligator V2B Double Seal Cap 50/Box
The ALLIGATOR Double Seal Valve Cap V2B is a must have for all trucking companies. It saves time and moey on all truck services. Time involved checking tire pressure and adding air is reduced 60-65%. The cap is screwed on instead of the original valve cap and doesn’t need to be removed to check air pressure or to add air. Gauging and inflating happen directly through the valve cap. This also means no lost valve caps! Comes in box of 50.
$59.95 -
Gaither Bead Bazooka 10L
The BEAD BAZOOKA® is the most powerful tire bead seater tool in the world, with its incredibly convenient trigger release, it makes seating the bead on even the most stubborn tire effortless.
Lighter, faster, Safer, and More Powerful than any other bead seater on the market, the BEAD BAZOOKA® is a must for anyone serious about tire service.
By utilizing our special RAR (Rapid Air Release) valve it is able to release air much faster than any other bead seaters. This allows us to make the BEAD BAZOOKA® much smaller while still delivering the bead seating performance you need.
$425.00 -
S146A Rillfit Regroover 110V
The S146A, Rillfit Hand Held Groover is lightweight and is equipped with a comfortable pistol grip design. Easy to use dial temperature settings ensure proper heat while the built in safety mechanism prohibits the blade from heating until pressure activated. Blades are easy to change and available in various sizes. Also available in 220V. The S146A comes with a cord, but the plug is NOT INCLUDED. Made in Germany.
$519.42 -
S145A (PS15) Regroover 110V/220V
The S145A (PS15) regroover is for cutting tread design into a repaired tire. It comes complete with a heat adjustable transformer for reliable cutting speed and control. It includes five temperature settings. Also available in 220V.
$625.99 -
Slide Hammer
Protect your expensive wheels from swinging hammers by breaking the bead loose with Gaither’s Slide Hammer. Use only on wheels without a hump.
HOW THE SLIDE HAMMER 12026B WORKS:
- Place the wedge of the Slide Hammer on the bead area of the tire near the flange of the wheel.
- Draw up the “slide” of the Slide Hammer and slam it down in order to break tire bead loose from wheel flange. It may be necessary to repeat this process in multiple positions around the tire/wheel assembly.
$195.00 -
Wheel Lock Removal Kit
The Steelman 9 piece Hubcap and Wheel Lock Removal Kit is perfect for working on GM, Corvette, Ford or Chrysler. The set is in a easy to open plastic case and it includes the following: GM Hubcap lock remover, GM sprocket hubcap lock remover, Ford and Chrysler hub cap lock remover, large universal locking lug nut remover, large wheel cover lock remover, oversize wheel lock remover, Corvette – GM “M” and “F” body wheel lock remover, stripped 18mm lug nuts, Corvette and GM lock remover, 19mm 3/4″ damaged wheel lug and oversized wheel lock remover, 7/8″ damaged wheel lug and oversized wheel lock remover, Lug nut remover punch and 3″ extension.
$83.45 -
Gaither 5 Gallon Bead Booster
This unit will work on all light truck, RV, large truck, and some agricultural tires. The Bead Booster® features a safety pop-off valve to prevent overfilling, and a set of goggles and earplugs for protection. The Bead Booster® tanks are ASME, CE and CRN approved and certified.
HOW THE BEAD BOOSTER® GB-5Z WORKS:
Gaither’s Bead Booster® is designed to assist in the inflation of tubeless tires by setting the bead with a quick release of air pressure. To use the Bead Booster® efficiently, simply fill the tank to the necessary pressure and attach an air line to the valve stem of the wheel. Then aim the barrel between the tire bead and wheel flange, and release the manual valve in order to allow a blast of air to set the bead.$338.03 -
Blue Cobra Truck Tire Demount Tool
Quickly demount nearly any 22.5″ and 24.5″ tubeless truck tire, up to a 13″ wide wheel. Ergonomic shaped steel handle with no-slip grip for optimum leverage while reducing back injuries. Solid steel Cobra head is press-fit into the steel handle — no fasteners to loosen or fall out. Allows demounting of the tire without lifting the entire wheel and tire off the ground — reduces back injuries. Aluminum bead support to grab the top bead of Super Single and Super Wide tires.
$365.90 -
Golden Buddy Mounting/Demounting Tool
AME Golden Buddy Mounting & Demounting Tool
• Mount tool assembly for 22.5 and 24.5 tires/wheels
• Demount assembly for 22.5 and 24.5 tires/wheels
• Bead keeper
• Heavy duty steel construction ensures long life
• Nylon rollers protect the bead
• Sold as a complete setGolden Buddy Instruction Manual & Parts Breakdown
$450.00 -
TECH Speed Cuff Gloves
The TECH Speed Cuff gloves are made of a breathable stretch spandex. The speed cuff allows them be put n or taken off quickly. The palms are made of an abrasion resistant material to make them last long! These gloves are available in medium, large and extra large.
$12.50 -
Magnetic Lug Handler Set
The Steelman PRO Magnetic Lug Handler Set is specifically designed for hand tightening and starting the most popular sizes of lug bolts on the market. Lug bolts are placed and held inside of the magnetic socket as wheel holes are lined up, lug bolts can be started to hold the wheel on the hub. A protective sleeve around the sockets protects wheels from scuff damage.
$54.90 -
Locking Lug Master Key Set
Frustrated when a customer brings a car to your garage with aftermarket wheels that need to be removed? Then it’s time you got Steelman PRO’s Locking Lug Master Key Set. The set was designed explicitly for the purpose of removing locking lug nuts on aftermarket wheels. The 16 piece set comes with both standard (SAE) and metric pieces that can be used on Spline, Star, Hex and Fluted Hex fasteners. As long as you have a combination wrench handy and you attach the corresponding key from the kit, you’ll be hard pressed to find an aftermarket wheel you can’t remove with this set. The kit includes a durable blow-molded plastic case with locking clips for easy organization and hassle-free storage.
$78.95 -
Rechargeable Pen Light (Red)
Ever find yourself needing light in a flash? Steelman PRO’s Rechargeable Pen Light is a conveniently sized piece of equipment you can carry to make sure you have light where and when you might need it. Constructed with a high impact polycarbonate lens on a durable anodized aluminum body, this pen light provides you with 70 lumens of brightness for up to as long as an hour and fifteen minutes. Its rechargeable lithium ion battery can be recharged up to 300 times allowing frequent use without constantly having to change batteries.
$35.00
